Get INSTANT Specifications on MGI Products with SpecBuilderGET STARTEDX
15" Compact Security Stainless Steel Lavatory Replacement for Rear Mount (Chase) Application - Acorn Engineering
Share this page
15" Replacement Compact Security Stainless Steel Lavatory for Rear Mount (Chase) Application

Share this page

15" Replacement Compact Security Stainless Steel Lavatory for Rear Mount (Chase) Application

Model Number:  3325
Yes
 
Product Details
  • Brand:  Replace-Ware
  • Material:  Stainless Steel
  • Fixture Width:  15"
  • Mounting:  Rear Mount (Chase)
  • Vandal Resistant:  High
  • Institutional Applications:  Correctional
  • Park and Recreation Applications:  Yes
  • Product Type:  Lavatory
  • Lead Free:  Yes
NameDescriptionFile Size
Submittal 3325 Lavatory506 KBDownload
NameDescriptionFile Size
Installing 3325 Lavatory180 KBView

Options

Option: Bubbler, Code[BC] - Option: Bubbler, Code

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Bubbler, Code
Option: Bubbler, Code$0.00Quantity: 1

An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.

Option: Bubbler, Penal[BP] - Option: Bubbler, Penal

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Bubbler, Penal
Option: Bubbler, Penal$0.00Quantity: 1

This option provides an anti-squirt bubbler without a mouthguard.

Option: Hemispherical Penal Bubbler[BPH] - Option: Hemispherical Penal Bubbler

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Hemispherical Penal Bubbler
Option: Hemispherical Penal Bubbler$0.00Quantity: 1

Use of this option provides a vandal and suicide resistant drinking bubbler which is designed to prevent use as a suicide device. Additionally, the bubbler design inhibits its use as a device to dislocate and remove handcuffs in a correctional facility. Recommended use is with optional -PBH Hemispherical Pushbutton.

Option: Lavatory Filler[LF] - Option: Lavatory Filler

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Lavatory Filler
Option: Lavatory Filler$0.00Quantity: 1

This option provides a bubbler which directs water into the lavatory basin only.

Single Temperature Air-Control Pneumatic Valve[03] - Single Temperature Air-Control Pneumatic Valve

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Single Temperature Air-Control Pneumatic Valve
Single Temperature Air-Control Pneumatic Valve$0.00Quantity: 1

This single temperature valve can be remotely located and is ideally suited for small chase areas. Air-Control features 0.5 GPM flow control intended for most lavy applications, indexed push button, stainless steel strainer and integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements. Valve is non-metering unless specified with -M option

Single Temperature Metering Air-Control™  Pneumatic Valve[03-M] - Single Temperature Metering Air-Control™ Pneumatic Valve

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Single Temperature Metering Air-Control™  Pneumatic Valve
Single Temperature Metering Air-Control™ Pneumatic Valve$0.00Quantity: 1

This single temperature valve is a pneumatically operated, pushbutton valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control™ features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997; CHSC 116875 and ADA requirements.

Hot & Cold <strong>Air-Control&trade;</strong> Pneumatic Valve[04] - Hot & Cold Air-Control™ Pneumatic Valve

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Hot & Cold <strong>Air-Control&trade;</strong> Pneumatic Valve
Hot & Cold Air-Control™ Pneumatic Valve$0.00Quantity: 1

This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.

Valve is non-metering unless specified with -M option
Brass version is available with -BRS option

Valve Specifications:
Minimum/Maximum Pressure: 30/100 PSI
Maximum Water Temperature: 130º F / 54º C

Hot & Cold Metering Air-Control&trade;  Pneumatic Valve[04-M] - Hot & Cold Metering Air-Control™ Pneumatic Valve

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Hot & Cold Metering Air-Control&trade;  Pneumatic Valve
Hot & Cold Metering Air-Control™ Pneumatic Valve$0.00Quantity: 1

This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the leadfree
requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.


If metering is not desire, a non-metering version may be specified with a plain option -04
Brass version is available with -BRS option

Option: Manifolded Valves, 2 Set[MA2] - Option: Manifolded Valves, 2 Set

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Manifolded Valves, 2 Set
Option: Manifolded Valves, 2 Set$0.00Quantity: 1

Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Two Single Temperature valves or two sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.

Option: Manifolded Valves, 3 Set[MA3] - Option: Manifolded Valves, 3 Set

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Manifolded Valves, 3 Set
Option: Manifolded Valves, 3 Set$0.00Quantity: 1

Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Three Single Temperature valves or three sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.

Option: Manifolded Valves, 4 Set[MA4] - Option: Manifolded Valves, 4 Set

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Manifolded Valves, 4 Set
Option: Manifolded Valves, 4 Set$0.00Quantity: 1

Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Four Single Temperature valves or four sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.

Hot (Metering) & Cold Air-Control&trade;  Pneumatic Valve[04-MH] - Hot (Metering) & Cold Air-Control™ Pneumatic Valve

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Hot (Metering) & Cold Air-Control&trade;  Pneumatic Valve
Hot (Metering) & Cold Air-Control™ Pneumatic Valve$0.00Quantity: 1

This hot and cold valve is a pneumatically operated, pushbutton valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering, only on the hot side,provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. The Air-Control™ valve features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements.

Option: Anchoring Assembly[3395] - Option: Anchoring Assembly

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Anchoring Assembly
Option: Anchoring Assembly$0.00Quantity: 1

This option securely anchors the replacement fixture to the wall on both flushing inlet fittings and lavy waste outlet fittings. It features a threaded anchoring pipe for applicable wall thickness, a thrust plate, and anchoring collar with locking adjustment screws.

Option: Enviro-Glaze® Powder Coating[EG] - Option: Enviro-Glaze® Powder Coating

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Enviro-Glaze® Powder Coating
Option: Enviro-Glaze® Powder Coating$0.00Quantity: 1

Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified

Option: Integral Shelf[IS] - Option: Integral Shelf

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Integral Shelf
Option: Integral Shelf$0.00Quantity: 1

With this option, the backsplash is extended to form an integral shelf. This provides additional space without creating areas where contraband can be concealed.

Option: Lavy Waste Extended To Be Specified[LWE] - Option: Lavy Waste Extended To Be Specified

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Lavy Waste Extended To Be Specified
Option: Lavy Waste Extended To Be Specified$0.00Quantity: 1

This option allows you to choose a desired length for the lavy waste.

Option: Basin Overflow[OF] - Option: Basin Overflow

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Basin Overflow
Option: Basin Overflow$0.00Quantity: 1

This option provides lavatory bowl with an overflow opening with connection to the lavatory waste outlet.

Option: Hemispherical Pushbutton[PBH] - Option: Hemispherical Pushbutton

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Hemispherical Pushbutton
Option: Hemispherical Pushbutton$0.00Quantity: 1

Use of this option provides a vandal resistant valve pushbutton. The conical shape is designed to prevent use as suicide device. When specified on lavatories or combys, the Hemispherical Penal Bubbler (-BPH) is also recommended.

Option: Plain End Waste[PE] - Option: Plain End Waste

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Plain End Waste
Option: Plain End Waste$0.00Quantity: 1

This type of waste tubing provides a gastight and watertight seal without the use of a waste adapter.

Option: P-Trap[PT] - Option: P-Trap

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: P-Trap
Option: P-Trap$0.00Quantity: 1

Although security fixtures are furnished standard with an elbow waste, a P-Trap can be specified for rear access fixtures. Front access fixtures are furnished standard with a removable P-trap.

Option: Toothbrush Holder[TB] - Option: Toothbrush Holder

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Toothbrush Holder
Option: Toothbrush Holder$0.00Quantity: 1

This integral stainless steel toothbrush holder provides a 9/32” x 9/16” opening and is constructed of 14 gage type 304 stainless steel with exposed surfaces polished to a satin finish.

Option: Towel Hook[TH] - Option: Towel Hook

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Towel Hook
Option: Towel Hook$0.00Quantity: 1

This option provides an “auto-release” towel/clothss hook that is tested to hold a minimum of 20 lbs and will readily support the weight of towels or clothes, but will automatically release into a downward position at 40 lbs or greater. Towel hook is fabricated of type 304 stainless steel with exposed surfaces polished to a satin finish. Hook is 3/8” in diameter and 1-1/2" long.

Option: Single Temperature Programmable Piezo Button[PPZ1] - Option: Single Temperature Programmable Piezo Button

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option: Single Temperature Programmable Piezo Button
Option: Single Temperature Programmable Piezo Button$0.00Quantity: 1

9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).

Option : Lead Free Brass Body Valve[BRS] - Option : Lead Free Brass Body Valve

The following item(s) have been added to your cart...
You can now continue shopping or go straight to checkout

Option : Lead Free Brass Body Valve
Option : Lead Free Brass Body Valve$0.00Quantity: 1

Option -BRS Brass Valve Body & checkstop assembly are pneumatically operated, pushbutton valves that use atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Air-Control valves are provided with a stainless steel strainer, a brass integral checkstop and conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. The -BRS Brass Valve Body option is also available with the 24V solenoid operated valves.