Should we keep showing the banner you just clicked on?
Shower Heads are solid brass, triple chrome-plated and include a 2.2 GPM flow restrictor. The Acorn Logan Wizard Shower Head design provides self-cleaning with every use, and has an adjustable spray pattern from a coarse stream to a fine mist.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
Provides a cast iron shower mounting base and drain for use with 600 and 700 series column showers. Drain includes a 3" no-hub outlet connection, clamping collar, supply inlet openings and is intended for vent off drain installation. Dome grate is chrome plated cast bronze and secures to clamping collar. Optionally available with -IC 3" Inside Caulk Waste or - FO 4" No-hub Outlet.
Provides a cast iron shower mounting base and drain for use with 600 and 700 series column showers. Drain includes a 3" no-hub outlet connection, 2" IPS center vent pipe connection, clamping collar and supply inlet openings. Dome grate is chrome plated cast bronze and secures to clamping collar.
Provides a cast iron shower mounting base and drain for use with 600 and 700 series column showers. Intended for vent off drain line installation, where the vent connection is on the drain line remote from the fixture drain fitting. Drain includes a 3" no-hub outlet connection and clamping collar. Dome grate is chrome plated cast bronze and secures to clamping collar. Optionally available with -IC 3" Inside Caulk Waste or -FO 4" No-hub Outlet.
Provides a cast iron shower mounting base and drain for use with 600 and 700 series column showers. Option features center 2" IPS vent pipe connection and clamping collar. It is intended for use where vent line is to run vertically through column shower and vent connection is made at the drain fixture fitting. Drain includes a 3" no-hub outlet connection. Dome grate is chrome plated cast bronze and secures to clamping collar.
Use this option when adapting from competitor Bradley 5 bolt pattern to an Acorn Column Shower 6 bolt pattern. This adaption raises the column 1/2", and intended for use when an area drain is to be utilized. Adapter plate and stainless steel hardware provided.
Specifying this option provides an integral soap tank, factory pre-piped, and installed within the shower system. The liquid soap is piped to dispensers. Acme Showers are furnished with one 6 qt. tank per 6 to 8 stations, and Meter-Trol dispensers at each station. Apex Showers, when specified for 2 or 3 stations, have a 2 qt. tank, and a single station model is furnished with a 1 qt. tank. Meter-Trol dispensers are supplied for each soap station. Classic and Capital Showers are provided with an approximate 1 gal. capacity tank. The exact size is affected by shower supply configuration.
This option is recommended for attaching a supply cover (Suffix Option -SC) to a suspended ceiling.
This option is a one-piece collar and flange assembly built right into the column. It allows rotational adjustment for misaligned drain bases. The adjustable flange is constructed of 14 gage, type 304 stainless steel and is fully welded to the column. The weld is ground smooth, and the entire column is polished to a satin finish.
Use of this option provides a vandal and suicide resistant shower head with a conical shape. Spray pattern is a non-adjustable multi-stream style. Shape of head prevents use as a suicide device. Recommended for use with optional -PBH Hemispherical Pushbutton.
This surface-mounted soap dish is constructed of heavy gage, type 304 stainless steel. The body is designed with a drain hole to keep bar soap dry.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
Use of this option allows for water savings by decreasing the flow rate to 1.4 GPM versus the standard 2.2 GPM.
Use of this option allows for water savings by decreasing the flow rate to 1.6 GPM versus the standard 2.2 GPM.
This option is available with B11, B21, T11 and T21 drains and is provided in lieu of 3" standard.
On Column and Pylon Showers, this option is ideal for outdoor installations such as beaches and swimming pools where users want to rinse their legs and feet. The shower head is located 18" above the ground and includes a separate control valve. This option is provided in addition to the conventional shower head.
This specification provides for manual adjustment of spray volume. It does, however, prevent positive shutoff.
This option provides a 3" Caulk Waste connection in lieu of the standard 3" no-hub outlet on B11, B21, T11 or T21 Column Shower drain models.
The suffix option provides a hex key control for the spray volume. This limits the adjustment to authorized personnel. This suffix option offers the same advantages as -H Hand Volume Control.
This option eliminates the drain slots located at the base of the column when using an area drain or a drain with dome grate. When specified for an area drain, the floor must be sloped away from the column to the drain. Not applicable for 600 Series column showers because no drain slots are provided.
The Multi-Steam, Ball Joint Shower Nozzle is available on all Acorn Shower- Ware® systems. The spray pattern is created through a multiple orifice design and is bather adjustable to create a narrow stream or wide pattern. It is ideal in areas that are not prone to vandalism, such as hotels and athletic clubs where the user may desire a more luxuriant shower. Unit may be configured for standard Shower-Ware shower head or for Bent Arm applications -not shown; must specify
In applications where vandalism is a primary concern, this shower head prevents the user from altering the spray or removing nozzle. Spray adjustment is made through the nozzle with a hex key. Specification of Penal Head prevents selection of additional shower head options.
Primarily specified for showers, this rugged stainless steel soap dish is recessed within the housing of the fixture. The bottom surface is lined with air-circulating dimples to keep bar soap dry.
This cover is used with top supply showers to hide supply piping and give a finished look to a shower installation. All brackets and exposed fasteners are furnished, except fasteners for attaching cover to the building. Shown here on Capital Column.
This option provides a valve cover assembly for use with 700 series column showers with Air-Control™ or Electronic valves. The valve cover is intended for units that are ordered with bottom supply to conceal the valve assembly positioned at the top of the unit. The cover is manufactured of heavy gage type 304 stainless steel and replaces the standard spray head lid.
This suffix option permits movement of the shower head in all directions, allowing the bather to adjust the spray pattern as needed.
This modification of the standard shower head has a set screw to lock the head into desired positions. This serves to prevent water discharge into drying areas, aisles, and doorways, which is especially beneficial in group shower applications.
Specification of this suffix option will not allow the spray head to be manipulated from side to side, preventing flooding outside of tubs. In group shower applications, it prevents the spraying of adjacent bathers.
Like suffix option -YY, this specification allows the shower head to be set and locked into position along its vertical arc of movement.