The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option provides the fixture with a top supply. This typicall will feature a threaded top spud on the fixture to mount a exposed top supply flush valve.
This option is intended for the supply line to pass thru the wall. This typicall will feature a rear spud on the fixture to mount a concealed top supply flush valve.
This option securely mounts the fixture and the housing to the wall from the front. The option is typical for toilets and urinals particular where rear mount option is available.
This option provides a secure mount from the rear of the fixture.
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
Designed for conservation, the toilet flush valve supplied operates with 1.6 gallon (6 liter) per flush. Standard supplied flush valve for toilet or comby uses 3.5 Gallon (13.2 Liter) per flush.
Acorn will provide a code approved toilet flush valve operating with 3.5 gallons (13.25 liters) per flush, unless specified. When the flush valve is for a Wall Supply toilet (with a rear spud), Acorn will typically provide a concealed flush valve with a vacuum breaker and push button. If Top Supply toilet (with a top spud) is specified, an exposed flush valve with a lever is provided. All exposed parts are chrome-plated
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
With concealed flush valves, when specified, Acorn will provide a code approved valve with vacuum breaker and wall mounted lever handle.
Provides an Acorn Time-Trol System for limiting frequency of flush valve operation through electronic control of a solenoid flush valve. Pushbutton conforms to ADA requirements using less than 5 lbs. to activate. Refer to individual MVC catalog sheets in Valves section for technical data.
The fixture is mounted on the floor and is plumbed for a floor waste outlet by others. This option provides an ADA compliant 18" integral toilet seat height. When used with the optional -HS Hinged Seat, the overall seat height remains ADA compliant at 19". It should be noted that fixture rough-ins will differ from standard with this option.
Bedpan lugs are integral to the closet fixture and helps with the positioning the bedpan during cleaning. The lugs are available for both vitreous china and stainless steel .
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option will make the housing of the fixture constructed of fourteen gage material. Fourteen gage material is .078" thick. This option is typically for heavy duty fixtures which range from 16 to 18 gage.
For use where wall thickness exceeds 2", this option allows the slip joint nut to be more accessible, making installation easier. The outlets at each end are NPT male threaded. Flush valve must be specified separately.
This option provides an attractive high polish mirror finish on the fixture. Specification may needed for exterior only or both exterior and interior for such cases as toilets.
When specified, Acorn will provide a open-front white plastic, hinged toilet seat. Although these seats offer obvious sanitary advantages, they are not tamper-resistant. Seats are available in a variety of styles. Shipped loose.
This option includes a white plastic, hinged toilet seat with a cover to enclose the interior of the toilet bowl.
This option eliminates punching for hinged seat.
This option is offered for -FM Front Mount toilets and includes (2) vertical carrier supports to allow for installation of toilet from the front. Carrier is installed within wall or plumbing chase and will accommodate 6" fixture mounting bolt centers.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.