The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option provides the fixture with a top supply. This typicall will feature a threaded top spud on the fixture to mount a exposed top supply flush valve.
This option is intended for the supply line to pass thru the wall. This typicall will feature a rear spud on the fixture to mount a concealed top supply flush valve.
This flush valve assembly is intended to be used with Master-Trol Valve Controller and can be used on combys, toilets and urinals. The 24VAC solenoid operated flush valve features pushbutton activation and is ADA compliant. Refer to EVS catalog sheets regarding Master-Trol options and technical data.
This option is for the electronic valve system with a single Piezo pushbutton. The Piezo pushbutton has no moving parts and is touch activation. When the Piezo pushbutton is touched this closes the circuit and activates the controller connected to the flush valve.
Acorn will provide a code approved urinal flush valve operating with 1.5 gallons (5.68 liters) per flush, unless specified. When the flush valve is for a Wall Supply urinal (with a rear spud), Acorn will typically provide a concealed flush valve with a vacuum breaker and push button. If Top Supply urinal (with a top spud) is specified, an exposed flush valve with a lever is provided. All exposed parts are chrome-plated.
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
With concealed flush valves, when specified, Acorn will provide a code approved valve with vacuum breaker and wall mounted lever handle.
Provides an Acorn Time-Trol System for limiting frequency of flush valve operation through electronic control of a solenoid flush valve. Pushbutton conforms to ADA requirements using less than 5 lbs. to activate. Refer to individual MVC catalog sheets in Valves section for technical data.
This option provides a flushing rim to wash down all four walls of the urinal.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
For use where wall thickness exceeds 2", this option allows the slip joint nut to be more accessible, making installation easier. The outlets at each end are NPT male threaded. Flush valve must be specified separately.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This option provides unit housing with 12 gage (0.109") thick stainless steel in lieu of standard. This option is available only for Security Fixtures