Should we keep showing the banner you just clicked on?
For additional drinking fountains please visit Murdock Mfg.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.
This option provides an anti-squirt bubbler without a mouthguard.
Use of this option provides a vandal and suicide resistant drinking bubbler which is designed to prevent use as a suicide device. Additionally, the bubbler design inhibits its use as a device to dislocate and remove handcuffs in a correctional facility. Recommended use is with optional -PBH Hemispherical Pushbutton.
This single temperature valve can be remotely located and is ideally suited for small chase areas. Air-Control features 0.5 GPM flow control intended for most lavy applications, indexed push button, stainless steel strainer and integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements. Valve is non-metering unless specified with -M option
This single temperature valve is for use with the Master-Trol Valve Controller. The 24VAC solenoid, soft closing valve features pushbutton activation, is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. Refer to EVS catalog sheets regarding Master- Trol options and technical data.Valve Specification:Minimum Pressure: 30 PSI (206.84 KPA)Maximum Pressure : 100 PSI (689.48 KPA)Maximum Water Temperature 130°F (54°C)EVS1 -Standard ValveEVS1-BRS -Lead-Free Brass Valve Body and Checkstop Assembly
This single temperature valve is for use with the Time-Trol Valve Controller. The 24V solenoid valve features pushbutton activation and is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997 and ADA requirements.
Use of this option eliminates the requirement to provide electrical power and wiring for units with -MVC1 Time-Trol. Each solenoid valve is powered by a concealed 9 volt battery (Not included).
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
Option -BRS Brass Valve Body & checkstop assembly are pneumatically operated, pushbutton valves that use atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Air-Control valves are provided with a stainless steel strainer, a brass integral checkstop and conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. The -BRS Brass Valve Body option is also available with the 24V solenoid operated valves.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option is to have the trim installed at the Acorn Engineering factory. The trim includes pushbutton(s), Bubbler, Spout, etc. This option saves time on installation in the field.
This option allows you to choose a desired length for the lavy waste.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
Use of this option provides a vandal resistant valve pushbutton. The conical shape is designed to prevent use as suicide device. When specified on lavatories or combys, the Hemispherical Penal Bubbler (-BPH) is also recommended.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This option provides unit housing with 12 gage (0.109") thick stainless steel in lieu of standard. This option is available only for Security Fixtures
Sister company Acorn Vac supplies means to evacuate plumbing waste through a vacuum system. The interface of atmospheric pressure at the toilet bowl and a constant vacuum pressure in the waste piping network provides a highly efficient flush, using only half gallon (1.89 liter) of water. When the push button is activated, the Extraction Valve opens, allowing atmospheric pressure to push toilet waste into the vacuum piping and toward the vacuum center. A water valve is simultaneously activated, allowing the toilet to be rinsed and refilled.