Should we keep showing the banner you just clicked on?
Learn More about this warning
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
When facing a Modular Service Center or a Lav-Toilet Comby, the toilet is at a 45 degree angle from the left hand corner of the cabinet.
When facing a Modular Service Center or a Lav-Toilet Comby, the toilet is at a 45 degree angle from the right hand corner of the cabinet.
The fixture is mounted on the floor and is plumbed for a wall waste outlet.
The fixture is mounted on the floor and is plumbed for a floor waste outlet by others.
An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.
This option provides an anti-squirt bubbler without a mouthguard.
Use of this option provides a vandal and suicide resistant drinking bubbler which is designed to prevent use as a suicide device. Additionally, the bubbler design inhibits its use as a device to dislocate and remove handcuffs in a correctional facility. Recommended use is with optional -PBH Hemispherical Pushbutton.
This option provides a bubbler which directs water into the lavatory basin only.
This single temperature valve is a pneumatically operated, pushbutton valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control™ features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997; CHSC 116875 and ADA requirements.
This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the leadfreerequirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.
Learn more about electric water management
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
Designed for conservation, the toilet flush valve supplied operates with 1.6 gallon (6 liter) per flush. Standard supplied flush valve for toilet or comby uses 3.5 Gallon (13.2 Liter) per flush.
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
This option is for -MVC Time-Trol valves. This feature enables the user to terminate the metering cycle at any time by simply pushing the pneumatic actuator pushbutton on the fixture.
The lavatory waste is directed into the toilet bowl on a Lav-Toilet Comby by way of a removable tube. Please consult local code requirements prior to specification of this option.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option is to have the trim installed at the Acorn Engineering factory. The trim includes pushbutton(s), Bubbler, Spout, etc. This option saves time on installation in the field.
This unique Acorn anti-flood system prevents toilet water overflow by shutting off the water supply from the flush valve. A reset button in the chase area reactivates the system only after the waste line has been cleared.
This option eliminates the requirement to manually reset the Flood-trol valve assembly by substituting a float tank for the reset button assembly. Flush valve becomes operable automatically after the flood condition has been corrected.
This option provides a grab bar with a closure plate for a 1432 combination fixture making it suicidal resistant.
This option provides a grab bar and a lavy closure plate that makes the fixture suicide resistant. Option -SPS (Ligature Resistant Skirl on Toilet) is recommended to meet Ligature Resistant applications.
This option provides an attractive high polish mirror finish seat.
When specified, Acorn will provide a white plastic, hinged toilet seat. Although these seats offer obvious sanitary advantages, they are not tamper-resistant.
This option provides the specified fixture without a grab bar.
This options allows you to get the fixture without a punching for a flush valve. Typically, this option is used for units with remote activation.
This option allows you to choose a desired length for the lavy waste.
This option provides lavatory bowl with an overflow opening with connection to the lavatory waste outlet.
Use of this option provides a vandal resistant valve pushbutton. The conical shape is designed to prevent use as suicide device. When specified on lavatories or combys, the Hemispherical Penal Bubbler (-BPH) is also recommended.
This type of waste tubing provides a gastight and watertight seal without the use of a waste adapter.
This option provides two punch holes for installations of toilet seats and seat covers.
This option provides a recessed toilet paper holder which accommodates standard sized rolls. The holder is fabricated out of stainless steel and is welded into the body of the fixture.Indicate location.
This option provides an extended stainless steel toilet bowl housing skirt. This inhibits the use of bowl as a ligature or suicide device. Skirt extends to front of toilet bowl. This option is only available on On-Floor Toilets with Wall Waste (-2) or Floor Waste (-3).
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This integral stainless steel toothbrush holder provides a 9/32” x 9/16” opening and is constructed of 14 gage type 304 stainless steel with exposed surfaces polished to a satin finish.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.