Should we keep showing the banner you just clicked on?
Learn More about this warning
The comby is designed to meet water conservation. ADA 2010 compliancy and the rigorous demands of security facilities.
DISCLAIMERS:WaterSenserecent advancements have allowed toilets to use 1.28 gallons (4.85 liters) per flush or less while still providing equal or superior performance. The WaterSense label is used on toilets that are independently certified to meet rigorous criteria for both performance and efficiency. Only water-saving toilets that complete the certification process can earn the WaterSense label. Must use optional HET valves to meet WaterSense label requirements.Please check with local ADA requirements. ADA complianceis subject to proper installation (including devices such as grab bars) and the interpretations of the local code authority.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the leadfreerequirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.
An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.
This option provides unit housing with 12 gage (0.109") thick stainless steel in lieu of standard. This option is available only for Security Fixtures
This option provides standard 2-3/8" O.D. Toilet bowl P-trap and includes an integral 3" O.D. plain end outlet connection that extends 3" beyond the rear of the fixture. This option will not alter the fixture flush valve rating or waste outlet rough-in location and still allows for passage of 2-1/8” diameter ball.
This option provides an anti-squirt bubbler without a mouthguard.
Please note assemby does not include tee. This option provides a 6" stainless steel four prong hook in the cleanout. Hook is connected to 31" steel wire rope and is connected to a 4" brass plug with a 4-1/2" bolt. Plug to bolt connection is water tight.
With this specification, the inlet consists of a slip joint O-ring connection and permits a plus or minus 1/2" horizontal adjustment. The outlet is 4" no-hub.
With this specification, the inlet consists of a slip joint O-ring connection and permits a plus or minus 1/2" horizontal adjustment. The outlet is 3" no-hub.
This option is to have the trim installed at the Acorn Engineering factory. The trim includes pushbutton(s), Bubbler, Spout, etc. This option saves time on installation in the field.
Click Enviro-Glaze's® colors below to view in detail!
Why use Enviro-Glaze®?
Acorn Engineering Company has developed a color coating system which will allow you to purchase durable stainless steel fixtures in designer colors. Enviro-Glaze® is a superior finish which gives you a colorful and functional alternative to a stainless steel finish.
What is Enviro-Glaze®?
Enviro-Glaze® is a smooth or textured hard coating that endures impact, will not bubble, and is chip-resistant. The coating is an electrostatically sprayed powder that is applied to the outsideof the stainless steel fixture, then cured at a temperature in excess of 400°F. Vigorous inspectionduring every step of the production process ensures that the finish on every fixture meets Acorn’s high quality standards.
How should Enviro-Glaze® be cleaned and maintained?
Acorn’s Enviro-Glaze® finish creates a beautiful surface that is easily cleaned, maintained andkept in a sanitary condition. A solution of warm water and mild soap is all that is necessary forcleaning the unit.*
* Long exposure to ultra-violet rays of the sun may cause chalking; however, should this occur, use of a mild furniture wax will remove residue and restore the original luster.
This option provides a flange which will accommodate a wax or rubber seal ring This is a standard feature on floor outlet and front access (Suffix Option -FA) models but must be specified on other models.
Use of this option provides a vandal and suicide resistant drinking bubbler which is designed to prevent use as a suicide device. Additionally, the bubbler design inhibits its use as a device to dislocate and remove handcuffs in a correctional facility. Recommended use is with optional -PBH Hemispherical Pushbutton.
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
This option provides a recessed toilet paper holder which accommodates standard sized rolls. The holder is fabricated out of stainless steel and is welded into the body of the fixture.Indicate location.
This option only available for use with optional Cleanout with O-ring (-CO1). This brass plug has a permanent stainless steel pin which extends downward to prevent large objects from passing through the waste piping. It is ideal for preventing mainline stoppages.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
The -VG3 side pattern for rectangular cabinets, measuring 8-3/4”, provides a free area of 20 square inches. An integral grille punching can be provided on most Penal-Ware cabinet showers , combys, and lavatories, making economical use of the wall opening behind the fixture for room ventilation. They are regularly furnished with 1/4" square holes located on 1/2" centers, which are punched into the cabinet.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
Learn more about electric water management
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
This option eliminates the requirement to manually reset the Flood-trol valve assembly by substituting a float tank for the reset button assembly. Flush valve becomes operable automatically after the flood condition has been corrected.
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
For use where wall thickness exceeds 2", this option allows the slip joint nut to be more accessible, making installation easier. The outlets at each end are NPT male threaded. Flush valve must be specified separately.
This option is for customer specified size, shape, and location of punching for valve or spout by others. Faucet/trim are not provided. The selection of this option presupposes that this fixture will not be using Acorn Air-Control™ valves or Electronic Val
Sister company Acorn Vac supplies means to evacuate plumbing waste through a vacuum system. The interface of atmospheric pressure at the toilet bowl and a constant vacuum pressure in the waste piping network provides a highly efficient flush, using only half gallon (1.89 liter) of water. When the push button is activated, the Extraction Valve opens, allowing atmospheric pressure to push toilet waste into the vacuum piping and toward the vacuum center. A water valve is simultaneously activated, allowing the toilet to be rinsed and refilled.
This options allows you to get the fixture without a punching for a flush valve. Typically, this option is used for units with remote activation.
This unique Acorn anti-flood system prevents toilet water overflow by shutting off the water supply from the flush valve. A reset button in the chase area reactivates the system only after the waste line has been cleared.
This flush valve assembly is intended to be used with Master-Trol® Plus Valve Controller and can be used on combys, toilets and urinals. The 24VAC solenoid operated flush valve features pushbutton activation and is ADA compliant.
This hot & cold valve is for use with the Master-Trol Valve Controller. The 24VAC solenoid, soft closing valve feature piezo touch activation and is provided with a stainless steel strainer and integral checkstop. The Piezo buttons have no moving parts and are touch activated. When the Piezo buttons are touched this closes the circuit and activates the controller which activates the valve. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. Pressing the "C(old)" button will dispense cold water; the "H(ot)" button will dispense tempered water.
This Hot & Cold valve is for use with the Master-Trol® Plus Valve Controller. The 24VAC solenoid, soft closing valve features pushbutton activation, is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.Pressing the "C(old)" button will dispense cold water; the "H(ot)" button will dispense tempered water.
This flush valve assembly is intended to be used with Master-Trol® Plus Valve Controller and can be used on combys, toilets and urinals. The 24VAC solenoid operated flush valve features Piezo pushbutton activation and is ADA compliant.
This single temperature valve is for use with the Master-Trol® Plus Valve Controller. The 24VAC solenoid, soft closing valve features piezo touch activation and is provided with a stainless steel strainer and integral checkstop. The Piezo buttons have no moving parts and are touch activated. When the Piezo buttons are touched this closes the circuit and activates the controller which activates the valve. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.
This single temperature valve is for use with the Master-Trol® Plus Valve Controller. The 24VAC solenoid, soft closing valve features pushbutton activation, is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.
Model 1449FA features a 19 x 49.25 inch (483 x 1,251 mm) counter with an integral D-shaped lavatory bowl and back splash. The toilet is offset opposite of the lavatory. Fixture is arranged to be installed on finished wall through access panels. Panels are located on front and side of cabinet and are secured with tamper-resistant screws.