Should we keep showing the banner you just clicked on?
Learn More about this warning
For additional drinking fountains please visit Murdock Mfg.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.
This option provides an anti-squirt bubbler without a mouthguard.
This single temperature valve can be remotely located and is ideally suited for small chase areas. Air-Control™ features 0.5 GPM flow control intended for most lavy applications, indexed push button, stainless steel strainer and integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements. Valve is non-metering unless specified with -M option
Learn more about electric water management
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
With the specification of this option, stainless steel angle braces are provided to give additional mounting strength to wall-hung lavatories. Fasteners for securing the angle braces to the lavatory are also included. Not available with -LC option.
Option -BRS Brass Valve Body & checkstop assembly are pneumatically operated, pushbutton valves that use atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Air-Control valves are provided with a stainless steel strainer, a brass integral checkstop and conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. The -BRS Brass Valve Body option is also available with the 24V solenoid operated valves.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option will make the housing of the fixture constructed of fourteen gage material. Fourteen gage material is .078" thick. This option is typically for heavy duty fixtures which range from 16 to 18 gage.
This option provides a surface mounted box with cover positioned directly behind the fixture and wall to conceal P-trap and single temp Air-Control™ valve assembly. Valve includes a drain down valve which drains into P-trap receptacle when valve is not in use. Fixture mounted on exterior wall remains free of any residual water which may damage plumbing. Box must be installed where room temperature remains above freezing.
Designed for use with Tubular P-Trap (Suffix Option -TPT), this chrome-plated, cast bronze strainer includes a 1-1/4" chrome-plated brass tailpiece.
This option provides a 1-1/4" O.D. x 1-1/2" O.D. chrome plated brass tubular trap with wall flange. It is usually specified along with the -GT Grid Strainer and Tailpiece.