Should we keep showing the banner you just clicked on?
Learn More about this warning
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
When facing a Lav-Toilet Comby, the toilet is in the front of the cabinet and is located toward the left hand side.
When facing a Lav-Toilet Comby or Modular Service Cener, the toilet is in the front of the cabinet and is located toward the right hand side.
This option includes and individual pushbutton control for the Air-Control™ Metering valve and is provided standard with a hot and cold pressure balancing mixing valve. Water flow metering can be field set for range from 5 to 60 seconds. Pushbutton requires less than 5 pounds of pressure to activate the valve. See individual model specification sheets for pushbutton location.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
Use of this option provides "Hands-Free" washing. It includes an infra-red sensor operated, solenoid water valve, mixing valve and a transformer. A 24VAC sensor is used on our Wash-Ware product lines whenever the -SO option is selected. This sensor operates with a 30 second metered flow or cycle once an object is detected before turning off the solenoid valve.
In addition to saving installation costs, this option is ideal for renovation projects where hands-free control is desired. Use of this option eliminates the requirement to provide electrical power and wiring for units with -SO Sensor Operated Control. Each sensor and solenoid valve is powered by a concealed battery pack with 6 AA batteries (batteries provided by the installer and not included). We recommend using Lithium or Alkaline batteries to power the sensor.The -SO-BAT Sensor activates the solenoid valve whenever an object is detected in the range area. The sensor will keep the solenoid open, allowing water to flow until the object is removed from sensor range. If an object is positioned in a manner that it is under constant detection the sensor will turn the solenoid off after 30-90 seconds.
This option provides sprayhead mounted vertical soap dispensers, centrally located below a six quart soap tank which is located within sprayhead. Dispensers are intended to accommodate common liquid and lotion soap varieties. This soap dispenser is ADA compliant.
This option provides no waste piping or grid strainer, these items to be provided by others.
Click Corterra's® bio-resin colors below to view in detail!
Corterra® is a revolutionary solid surface polymer bio-resin that comes in a variety of attractive color options to match any surrounding décor. Corterra provides a chic yet durable finish to a multitude of MGI products. Aside from luxury aesthetics, Corterra is incredibly eco-friendly and uses a minimum of 15% post-consumer recycled material, as well as a minimum of 5% rapidly renewable material derived from bio-based sources. Corterra is sleek, sturdy and ensures universal aesthetics to last for years. Its benefits include:
Corterra is exclusively available on Solid Surface Wash Fountain, Wash Basin and Shower Bases.
Tested and complies to ASTM F 462-79 (R-2007) entitled, “Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities.”Note: The Corterra® solid surface color "Peppercorn" [OCC06] was discontinued August 2016.
This option provides a Single Temperature Air-Control™ Metering Valve assembly and is offered as an alternative to the standard hot and cold mixing valve when a single water supply is desired.