Should we keep showing the banner you just clicked on?
Learn More about this warning
Learn more about the Meridian-Edge® by clicking below.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option is for customer specified size, shape, and location of punching for valve or spout by others. Faucet/trim are not provided. The selection of this option presupposes that this fixture will not be using Acorn Air-Control™ valves or Electronic Val
This option includes and individual pushbutton control for the Air-Control™ Metering valve and is provided standard with a hot and cold pressure balancing mixing valve. Water flow metering can be field set for range from 5 to 60 seconds. Pushbutton requires less than 5 pounds of pressure to activate the valve. See individual model specification sheets for pushbutton location.
Use of this option provides "Hands-Free" washing. It includes an infra-red sensor operated, solenoid water valve, mixing valve and a transformer. A 24VAC sensor is used on our Wash-Ware product lines whenever the -SO option is selected. This sensor operates with a 30 second metered flow or cycle once an object is detected before turning off the solenoid valve.
In addition to saving installation costs, this option is ideal for renovation projects where hands-free control is desired. Use of this option eliminates the requirement to provide electrical power and wiring for units with -SO Sensor Operated Control. Each sensor and solenoid valve is powered by a concealed battery pack with 6 AA batteries (batteries provided by the installer and not included). We recommend using Lithium or Alkaline batteries to power the sensor.The -SO-BAT Sensor activates the solenoid valve whenever an object is detected in the range area. The sensor will keep the solenoid open, allowing water to flow until the object is removed from sensor range. If an object is positioned in a manner that it is under constant detection the sensor will turn the solenoid off after 30-90 seconds.
This faucet features the convenience and efficiency of washing and drying at the same plac e. This faucet is designed to be mounted the deck of a wash basin. This unit is a deck mounted Short Dyson Airblade Wash+Dry.
This faucet features the convenience and efficiency of washing and drying at the same place. This faucet is designed to be mounted on wall and over a wash basin. This unit is a wall mounted Dyson® Airblade™ Wash+Dry.
This option provides an individual deck mounted pump dispenser for each basin (Meridian) or every other station (Wash-Ware). Dispenser features anti-rotation pin to maintain discharge nozzle over basin. Option includes a reservoir featuring a separate refill. Not available for Corterra Kurve washbasins model number: 3791, 3792 and 3793.
This option provides a Single Temperature Air-Control™ Metering Valve assembly and is offered as an alternative to the standard hot and cold mixing valve when a single water supply is desired.
The selection of this option has Acorn Engineering providing an ASSE 1016 compliant temperature/pressure balancing mixing valve. The valve accommodates changes in supply inlet temperature and pressure.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
Cafe con Leche
Corterra® is a revolutionary solid surface polymer bio-resin that comes in a variety of attractive color options to match any surrounding décor. Corterra provides a chic yet durable finish to a multitude of MGI products. Aside from luxury aesthetics, Corterra is incredibly eco-friendly and uses a minimum of 15% post-consumer recycled material, as well as a minimum of 5% rapidly renewable material derived from bio-based sources. Corterra is sleek, sturdy and ensures universal aesthetics to last for years. Its benefits include:
Corterra is exclusively available on Solid Surface Wash Fountain, Wash Basin and Shower Bases.
Tested and complies to ASTM F 462-79 (R-2007) entitled, “Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities.”Note: The Corterra® solid surface color "Peppercorn" [OCC06] was discontinued August 2016.
Unit will conform with ANSI, UFAS, OBC and ADA Accessibility Standards when properly installed. Counter and integral basin to be constructed of Corterra recycled solid-surface polymer resin and conform to ANSI Z124.3 and ANSI Z124.6 load ratings. Hinged Trap enclosure is to be constructed of heavy gage, type 304 stainless steel with satin finish. Washbasin to be furnished complete with - SO Sensor Operation & provide solenoid actuated valve with deck mounted infrared spout, ASSE 1070 compliant temperature/pressure balancing mixing valve with integral checks and strainer continuous waste. Ø1-1/2" OD single P-trap available.
Meridian Corterra Two Person Washbasin by Acorn (Specify options). Unit will conform with ANSI, UFAS, OBC and ADA Accessibility Standards when properly installed. Counter and integral basin to be constructed of Corterra recycled solidsurface polymer resin and conform to ANSI Z124.3 and ANSI Z124.6 load ratings. Hinged Trap enclosure is to be constructed of heavy gage, type 304 stainless steel with satin finish. Washbasin to be furnished complete with -SO Sensor Operation & provide solenoid actuated valve with deck mounted infrared spout, ASSE 1070 compliant temperature/pressure balancing mixing valve with integral checks and strainer continuous waste. Ø1-1/2" OD single P-trap available.