Should we keep showing the banner you just clicked on?
Learn More about this warning
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
Option AL2 is an electric alarm with a flashing amber light and horn. System is activated by a single pole flow switch once the shower or eye wash is activated.Note: Option AL1 (non-flashing light and horn) has been discontinued. However, the Option AL2 manual/installation instruction guide does have its repair parts listed.
The stainless steel "clam-shell" cover rises automatically when the push handle is activated. Conversely, the cover closes when the handle is returned to the off position. The assembly may be ordered as an add-on.
Model S0000-FLW1 is a 1-1/4" NPTI DPDT double pole, double throw flow switch has contacts which allow for remote monitoring (by others) and audio/visual alarms (by others). Switch is installed in the water supply line prior to the emergency equipment and is activated once it senses the movement of water in the supply line.
As an option available for eye-face washes (or eye washes), the 1/2 inch Freeze Protection Valve will initiate flow when the thermostatic actuator senses a temperature of 35°F (1.7°C). It is typically piped to a drain and thereby purges the cold water and brings fresh water to the valve/fixture to prevent freezing conditions. The valve will remain open until it senses a water temperature of 40°F (4.4°C) or more at which point it will automatically close (resetting itself).
HFC is a hand foot control that provides the option of activating the eye wash or eye/face wash with a foot pedal in addition to the push handle.
MC1 is a modesty curtain for horizontal showers or pedestal mounted combination stations. The unit provides privacy during the removal of contaminated clothing while the shower is in operation.
MS1 provides a Magnetic Actuated Proximity (MAP) Switch for either an eye-face wash or emergency shower. The application of this switch is can be provided to work with the optional alarms.
MS2 provides two Magnetic Actuated Proximity (MAP) Switch for a combination unit; one for each component of the unit. The application of this switch is can be provided to work with the optional alarms.
As an option available for eye-face washes (or eye washes), the 1/2 inch Scald Protection Valve will initiate flow when the thermostatic actuator senses a temperature of 98°F (36.7°C). It is typically piped to a drain and thereby purges the unsafe water and brings fresh/safe water to the valve/fixture. The valve will remain open (fully open at 105°F (40.6°C)) until it senses a safe temperature of 95°F or less at which point it will automatically close (resetting itself).