Should we keep showing the banner you just clicked on?
Learn More about this warning
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
Designed for conservation, the toilet flush valve supplied operates with 1.6 gallon (6 liter) per flush. Standard supplied flush valve for toilet or comby uses 3.5 Gallon (13.2 Liter) per flush.
Learn more about electric water management
Acorn will provide a code approved toilet flush valve operating with 3.5 gallons (13.25 liters) per flush, unless specified. When the flush valve is for a Wall Supply toilet (with a rear spud), Acorn will typically provide a concealed flush valve with a vacuum breaker and push button. If Top Supply toilet (with a top spud) is specified, an exposed flush valve with a lever is provided. All exposed parts are chrome-plated
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
With this specification, the inlet consists of a slip joint O-ring connection and permits a plus or minus 1/2" horizontal adjustment. The outlet is 4" no-hub.
With this specification, the inlet consists of a slip joint O-ring connection and permits a plus or minus 1/2" horizontal adjustment. The outlet is 3" no-hub.
Please note assemby does not include tee. This option provides a 6" stainless steel four prong hook in the cleanout. Hook is connected to 31" steel wire rope and is connected to a 4" brass plug with a 4-1/2" bolt. Plug to bolt connection is water tight.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This unique Acorn anti-flood system prevents toilet water overflow by shutting off the water supply from the flush valve. A reset button in the chase area reactivates the system only after the waste line has been cleared.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
This option only available for use with optional Cleanout with O-ring (-CO1). This brass plug has a permanent stainless steel pin which extends downward to prevent large objects from passing through the waste piping. It is ideal for preventing mainline stoppages.
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This option intended to inhibit hardware, such as screws, washers, nuts & bolts, debris or other foreign material from being deposited inside the fixture bowl during construction leading up to startup in order to preventing damage to fixture finish. Toilet shipping cover is fabricated of 18 gage galvanized steel.
Sister company Acorn Vac supplies means to evacuate plumbing waste through a vacuum system. The interface of atmospheric pressure at the toilet bowl and a constant vacuum pressure in the waste piping network provides a highly efficient flush, using only half gallon (1.89 liter) of water. When the push button is activated, the Extraction Valve opens, allowing atmospheric pressure to push toilet waste into the vacuum piping and toward the vacuum center. A water valve is simultaneously activated, allowing the toilet to be rinsed and refilled.