Should we keep showing the banner you just clicked on?
Learn More about this warning
Fixture is arranged to be installed on finished wall and serviced from an accessible pipe chase. Urinal shall be back wall washdown type. Fixture shall be fabricated from 14 gage, type 304 stainless steel and shall have coved corners to facilitate cleaning. Bottom shall be sloped to an integrally welded, high capacity, stainless steel beehive dome strainer. This urinal is Not Available for Sale nor Use in California.The flush valves (flushometers) compatible with this urinal exceed the allowable maxiumum rate. California Energy Commission requires the rate to be no more than 0.125 Gallon (0.473 Liters) per Flush.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option provides the fixture with a top supply. This typically will feature a threaded top spud on the fixture to mount a exposed top supply flush valve.
This option is intended for the supply line to pass through the wall. This typically will feature a rear spud on the fixture to mount a concealed top supply flush valve.
Learn more about electric water management
Acorn will provide a code approved urinal flush valve operating with 1.5 gallons (5.68 liters) per flush, unless specified. When the flush valve is for a Wall Supply urinal (with a rear spud), Acorn will typically provide a concealed flush valve with a vacuum breaker and push button. If Top Supply urinal (with a top spud) is specified, an exposed flush valve with a lever is provided. All exposed parts are chrome-plated.
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
With concealed flush valves, when specified, Acorn will provide a code approved valve with vacuum breaker and wall mounted lever handle.
This option provides a flushing rim to wash down all four walls of the urinal.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
For use where wall thickness exceeds 2", this option allows the slip joint nut to be more accessible, making installation easier. The outlets at each end are NPT male threaded. Flush valve must be specified separately.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This option provides unit housing with 12 gage (0.109") thick stainless steel in lieu of standard. This option is available only for Security Fixtures