Should we keep showing the banner you just clicked on?
Learn More about this warning
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option provides a flange meant to collect moisture, which gravity draws down the wall, and prevent it from ending up in the wall cavity. A single flange is factory mounted on the rear extending 1"above the shoulder.
This option provides flanges meant to collect moisture, which gravity draws down the wall, and prevent it from ending up in the wall cavity. Flanges are mounted on the rear and two adjacent sides extending 1" above the shoulders.
This option provides a dome shaped strainer with sufficient free area for quick drainage even when partly covered and protects the connected piping from the intrusion of debris.
Compression sealing, flexible PVC donut shaped ring drain gasket provides simple, quick connection with inside caulk or inside gasket waste outlet on mop sink to 3” drain DWV plastic, Sch. 40, steel or X.H. (extra-heavy) cast iron pipe. Requires no special tools gluing, threading or lead caulking.
This mop sink option provides a two handle, 8" centerset, wall mounted, utility faucet. Faucet features brass construction with rough chrome finish, pail hook with 9-1/4" reach, wall brace, vacuum breaker, threaded spout & 1/2" NPTF supply inlets.
Selection of this option provides bucket filler hose shipped loose for field installation. The filler hose is 36" (91.44 cm) long and includes a female 3/4" NPSH hose end fitting to connect to the utility faucet. Option also includes a single wall hanger to secure the hose when not in use.
This option provides a stainless steel mountining bracket. The bracket is provided to organize and secure mops or brooms when not in use. Mounting bracket is 4-3/4 high x 23" wide (12.07 x 58.43 cm) and includes three station mop handle grips.
Optional mop sink wall guards provide protection against impact and posibble water damage that may occur during normal everyday use. The guards are stainless steel plate(s) shpped loose for field installation.
The -LB option provides a removable lint basket that fits inside the 3" pipe inside caulk waste provided by others. Debris can be collected and removed to prevent drain clogs.
This is an option for a threshold of a security shower or a stainless steel mop sink. The receptor or mop sink is secured to the floor through the specification of this option.