Should we keep showing the banner you just clicked on?
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option is for the supplies to be connected above the shower on the shower of the wall. This option is often combined with -SC (supply cover) to conceal the plumbing.
This option specifies that the supplies are coming from within the wall, and into the back of the shower. With this option roughing-in at correct location is important.
Specifying this option provides an integral soap tank, factory pre-piped, and installed within the shower system. The liquid soap is piped to dispensers. Acme Showers are furnished with one 6 qt. tank per 6 to 8 stations, and Meter-Trol dispensers at each station. Apex Showers, when specified for 2 or 3 stations, have a 2 qt. tank, and a single station model is furnished with a 1 qt. tank. Meter-Trol dispensers are supplied for each soap station. Classic and Capital Showers are provided with an approximate 1 gal. capacity tank. The exact size is affected by shower supply configuration.
This option provides a 36" long stainless steel curtain rail with a white Herculite® curtain. Curtain rail includes hooks and mounting clips to wall and is intended for installation within an alcove.
Use of this option provides a vandal and suicide resistant shower head with a conical shape. Spray pattern is a non-adjustable multi-stream style. Shape of head prevents use as a suicide device. Recommended for use with optional -PBH Hemispherical Pushbutton.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
Use of this option allows for water savings by decreasing the flow rate to 1.4 GPM versus the standard 2.2 GPM.
Use of this option allows for water savings by decreasing the flow rate to 1.6 GPM versus the standard 2.2 GPM.
Use of this option allows for water savings by decreasing the flow rate to 2.0 GPM versus the standard 2.2 GPM.
This option will make the housing of the fixture constructed of fourteen gage material. Fourteen gage material is .078" thick. This option is typically for heavy duty fixtures which range from 16 to 18 gage.
This option provides an ADA compliant fixed shower head with a 48" discharge height to accommodate installations where vandalism of standard handshower is a concern. For Shower-Ware products, image shown with the addition of Penal Shower head nozzle (-P) option.
This option is to have phenolic as the seat surface in lieu of a padded surface. Phenolic material is 1/2" thick, and white in color. Frame is made of stainless steel type 304 with a satin finish.
This option is to have stainless steel as the seat surface. Stainless steel 16 gage, and has a satin finish. Frame is made of heavy gage stainless steel and has a satin finish.
This option is intended for shower units when the folding seat is not required or to be furnished by others. Note: May affect ADA compliance.
This option is intended for shower units when the grab bar is not required or to be furnished by others. Note: May affect ADA compliance.
This option eliminates a recessed soap dish where it is provided as standard feature.
The Multi-Steam, Ball Joint Shower Nozzle is available on all Acorn Shower- Ware® systems. The spray pattern is created through a multiple orifice design and is bather adjustable to create a narrow stream or wide pattern. It is ideal in areas that are not prone to vandalism, such as hotels and athletic clubs where the user may desire a more luxuriant shower. Unit may be configured for standard Shower-Ware shower head or for Bent Arm applications -not shown; must specify
In applications where vandalism is a primary concern, this shower head prevents the user from altering the spray or removing nozzle. Spray adjustment is made through the nozzle with a hex key. Specification of Penal Head prevents selection of additional shower head options.
This option provides a male and female stainless steel quick disconnect coupler assembly to allow for easy removal of the hand shower.
This option provides a reinforced stainless steel privacy panel, post, 36" headrail and vinyl curtain. Installation of this equipment allows for mounting of folding seat opposite the shower control as required by ADA. Shower must be positioned in a corner to utilize components. Panel is reinforced to accept folding seat.
This option provides a 24" slide bar for use with -Fx Hand Shower. Slide bar is shipped loose for wall mounting.
This option specifies the bottom of the surface mounted shower fixture to be sloped. The slope is to be 30°.
This option specifies the top of the surface mounted shower fixture to be sloped. The slope is to be 30° for adequate drainage, and can not pull yourself or hide contraband on top of fixture.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
When specifying an Acorn Commercial Shower, this option is appropriate when shower heads are to be provided by others. Acorn will only provide the control valve.
This suffix option permits movement of the shower head in all directions, allowing the bather to adjust the spray pattern as needed.
This modification of the standard shower head has a set screw to lock the head into desired positions. This serves to prevent water discharge into drying areas, aisles, and doorways, which is especially beneficial in group shower applications.
Specification of this suffix option will not allow the spray head to be manipulated from side to side, preventing flooding outside of tubs. In group shower applications, it prevents the spraying of adjacent bathers.
Like suffix option -YY, this specification allows the shower head to be set and locked into position along its vertical arc of movement.