Should we keep showing the banner you just clicked on?
Learn More about these warnings
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This single temperature valve can be remotely located and is ideally suited for small chase areas. Air-Control™ features 0.5 GPM flow control intended for most lavy applications, indexed push button, stainless steel strainer and integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements. Valve is non-metering unless specified with -M option
This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.Valve is non-metering unless specified with -M optionBrass version is available with -BRS optionValve Specifications:Minimum/Maximum Pressure: 30/100 PSIMaximum Water Temperature: 130º F / 54º C
Learn more about electric water management
Use of this option provides a vandal and suicide resistant shower head with a conical shape. Spray pattern is a non-adjustable multi-stream style. Shape of head prevents use as a suicide device. Recommended for use with optional -PBH Hemispherical Pushbutton.
This surface-mounted soap dish is constructed of heavy gage, type 304 stainless steel. The body is designed with a drain hole to keep bar soap dry.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
Use of this option allows for water savings by decreasing the flow rate to 1.4 GPM versus the standard 2.2 GPM.
Use of this option allows for water savings by decreasing the flow rate to 1.6 GPM versus the standard 2.2 GPM.
Use of this option allows for a higher flow rate of 2.0 Gallons (7.58 Liters) per Minute versus the standard 1.6 Gallon (6 Liters) per Minute. This flow rate of 2.0 gallons will no longer be available for use in the state of California after July 2018.
Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Two Single Temperature valves or two sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
This option provides a showerhead that can be rotated and locked into almost any desired angle.
This specification allows the shower head to be set and locked into position along its vertical arc of movement.
Primarily specified for showers, this rugged stainless steel soap dish is recessed within the housing of the fixture. The bottom surface is lined with air-circulating dimples to keep bar soap dry.
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
Option -BRS Brass Valve Body & checkstop assembly are pneumatically operated, pushbutton valves that use atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Air-Control valves are provided with a stainless steel strainer, a brass integral checkstop and conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. The -BRS Brass Valve Body option is also available with the 24V solenoid operated valves.