Should we keep showing the banner you just clicked on?
Learn More on Ligature-Resistant Fixtures
LR2010 is an oval bowl, front mount drinking fountain. The tapered design reduce the risk of the fixture being used as a ligature device. The fixture is designed to be installed and serviced from the front of the unit.Fixture shall be fabricated from 16 gage, type 304 stainless steel. Construction shall be seamless welded and exposed surfaces shall have a satin finish. Fixture shall be furnished with an Air-Control self-closing valve, a hemispherical bubbler and pushbuttons, a grid strainer with close elbow, and a mounting bracket. Valve and bubbler conform with the lead-free requirements of NSF61, Section 9,1997 and CHSC 116875. Installer shall furnish mounting screws, anchor shields, and required reinforcement.
The wall mounted drinking fountain is designed to provide ligature resistance and vandal resistance. The fixture is designed to be installed and serviced from the front of the unit. The drinking fountain is ideal for commerical applications, especially park and recreational facilities.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This single temperature valve can be remotely located and is ideally suited for small chase areas. Air-Control features 0.5 GPM flow control intended for most lavy applications, indexed push button, stainless steel strainer and integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements. Valve is non-metering unless specified with -M option
This single temperature valve is for use with the Time-Trol Valve Controller. The 24V solenoid valve features pushbutton activation and is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997 and ADA requirements.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
Option -BRS Brass Valve Body & checkstop assembly are pneumatically operated, pushbutton valves that use atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Air-Control valves are provided with a stainless steel strainer, a brass integral checkstop and conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. The -BRS Brass Valve Body option is also available with the 24V solenoid operated valves.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option provides a surface mounted box with cover positioned directly behind the fixture and wall to conceal P-trap and single temp Air-Control™ valve assembly. Valve includes a drain down valve which drains into P-trap receptacle when valve is not in use. Fixture mounted on exterior wall remains free of any residual water which may damage plumbing. Box must be installed where room temperature remains above freezing.