Should we keep showing the banner you just clicked on?
Learn More about these warnings
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
When facing a Modular Service Center or a Lav-Toilet Comby, the toilet is at a 45 degree angle from the left hand corner of the cabinet.
When facing a Modular Service Center or a Lav-Toilet Comby, the toilet is at a 45 degree angle from the right hand corner of the cabinet.
The fixture is mounted on the floor and is plumbed for a wall waste outlet.
The fixture is mounted on the floor and is plumbed for a floor waste outlet by others.
An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.
This option provides an anti-squirt bubbler without a mouthguard.
Use of this option provides a vandal and suicide resistant drinking bubbler which is designed to prevent use as a suicide device. Additionally, the bubbler design inhibits its use as a device to dislocate and remove handcuffs in a correctional facility. Recommended use is with optional -PBH Hemispherical Pushbutton.
This option provides a bubbler which directs water into the lavatory basin only.
This single temperature valve can be remotely located and is ideally suited for small chase areas. Air-Control™ features 0.5 GPM flow control intended for most lavy applications, indexed push button, stainless steel strainer and integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements. Valve is non-metering unless specified with -M option
This single temperature valve is a pneumatically operated, pushbutton valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control™ features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997; CHSC 116875 and ADA requirements.
This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.Valve is non-metering unless specified with -M optionBrass version is available with -BRS optionValve Specifications:Minimum/Maximum Pressure: 30/100 PSIMaximum Water Temperature: 130º F / 54º C
This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the leadfreerequirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.
Learn more about electric water management
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
This option is for -MVC Time-Trol valves. This feature enables the user to terminate the metering cycle at any time by simply pushing the pneumatic actuator pushbutton on the fixture.
The lavatory waste is directed into the toilet bowl on a Lav-Toilet Comby by way of a removable tube. Please consult local code requirements prior to specification of this option.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option is to have the trim installed at the Acorn Engineering factory. The trim includes pushbutton(s), Bubbler, Spout, etc. This option saves time on installation in the field.
This unique Acorn anti-flood system prevents toilet water overflow by shutting off the water supply from the flush valve. A reset button in the chase area reactivates the system only after the waste line has been cleared.
This option eliminates the requirement to manually reset the Flood-trol valve assembly by substituting a float tank for the reset button assembly. Flush valve becomes operable automatically after the flood condition has been corrected.
This option provides an attractive high polish mirror finish seat.
When specified, Acorn will provide a white plastic, hinged toilet seat. Although these seats offer obvious sanitary advantages, they are not tamper-resistant.
With this option, the backsplash is extended to form an integral shelf. This provides additional space without creating areas where contraband can be concealed.
This options allows you to get the fixture without a punching for a flush valve. Typically, this option is used for units with remote activation.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
This option provides lavatory bowl with an overflow opening with connection to the lavatory waste outlet.
Use of this option provides a vandal resistant valve pushbutton. The conical shape is designed to prevent use as suicide device. When specified on lavatories or combys, the Hemispherical Penal Bubbler (-BPH) is also recommended.
This option provides a recessed toilet paper holder which accommodates standard sized rolls. The holder is fabricated out of stainless steel and is welded into the body of the fixture.Indicate location.
This option provides an extended stainless steel toilet bowl housing skirt. This inhibits the use of bowl as a ligature or suicide device. Skirt extends to front of toilet bowl. This option is only available on On-Floor Toilets with Wall Waste (-2) or Floor Waste (-3).
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This integral stainless steel toothbrush holder provides a 9/32” x 9/16” opening and is constructed of 14 gage type 304 stainless steel with exposed surfaces polished to a satin finish.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This option provides unit housing with 12 gage (0.109") thick stainless steel in lieu of standard. This option is available only for Security Fixtures
This option provides an “auto-release” towel/clothss hook that is tested to hold a minimum of 20 lbs and will readily support the weight of towels or clothes, but will automatically release into a downward position at 40 lbs or greater. Towel hook is fabricated of type 304 stainless steel with exposed surfaces polished to a satin finish. Hook is 3/8” in diameter and 1-1/2" long.
This option intended to inhibit hardware, such as screws, washers, nuts & bolts, debris or other foreign material from being deposited inside the fixture bowl during construction leading up to startup in order to preventing damage to fixture finish. Toilet shipping cover is fabricated of 18 gage galvanized steel.
Sister company Acorn Vac supplies means to evacuate plumbing waste through a vacuum system. The interface of atmospheric pressure at the toilet bowl and a constant vacuum pressure in the waste piping network provides a highly efficient flush, using only half gallon (1.89 liter) of water. When the push button is activated, the Extraction Valve opens, allowing atmospheric pressure to push toilet waste into the vacuum piping and toward the vacuum center. A water valve is simultaneously activated, allowing the toilet to be rinsed and refilled.
The -VG1 side pattern for multi-sided cabinets, measuring 5-3/4" x 8-3/4", provides a free area of 14 square inches.An integral grille punching can be provided on most Penal-Ware cabinet showers , combys, and lavatories, making economical use of the wall opening behind the fixture for room ventilation. They are regularly furnished with 1/4" square holes located on 1/2" centers, which are punched into the cabinet.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).