Should we keep showing the banner you just clicked on?
The following item(s) have been added to your cart...You can now continue shopping or go straight to checkout
When facing a Modular Service Center or a Lav-Toilet Comby, the toilet is at a 45 degree angle from the left hand corner of the cabinet.
When facing a Modular Service Center or a Lav-Toilet Comby, the toilet is at a 45 degree angle from the right hand corner of the cabinet.
The fixture is mounted on the floor and is plumbed for a wall waste outlet.
The fixture is mounted on the floor and is plumbed for a floor waste outlet by others.
An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.
This option provides an anti-squirt bubbler without a mouthguard.
Use of this option provides a vandal and suicide resistant drinking bubbler which is designed to prevent use as a suicide device. Additionally, the bubbler design inhibits its use as a device to dislocate and remove handcuffs in a correctional facility. Recommended use is with optional -PBH Hemispherical Pushbutton.
This option provides a bubbler which directs water into the lavatory basin only.
This single temperature valve is a pneumatically operated, pushbutton valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control™ features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997; CHSC 116875 and ADA requirements.
This hot and cold valve is a pneumatically operated, hand pushbutton, soft closing valve that uses atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Metering provides an adjustable timed cycle flow from the valve. Timing is adjustable from 5 to 60 seconds. Air-Control features non-hold open pushbutton activation, and is provided with a stainless steel strainer and an integral checkstop. Valve conforms with the leadfreerequirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements.
This single temperature valve is for use with the Master-Trol Valve Controller. The 24VAC solenoid, soft closing valve features pushbutton activation, is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. Refer to EVS catalog sheets regarding Master- Trol options and technical data.Valve Specification:Minimum Pressure: 30 PSI (206.84 KPA)Maximum Pressure : 100 PSI (689.48 KPA)Maximum Water Temperature 130°F (54°C)EVS1 -Standard ValveEVS1-BRS -Lead-Free Brass Valve Body and Checkstop Assembly
This single temperature valve is for use with the Master-Trol Valve Controller. The 24VAC solenoid, soft closing valve features piezo touch activation and is provided with a stainless steel strainer and integral checkstop. The Piezo buttons have no moving parts and are touch activated. When the Piezo buttons are touched this closes the circuit and activates the controller which activates the valve. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. Refer to EVS catalog sheets regarding Master-Trol options and technical data.Valve Specification:Minimum Pressure: 30 PSI (206.84 KPA)Maximum Pressure : 100 PSI (689.48 KPA)Maximum Water Temperature 130°F (54°C)EVSP1 -Standard ValveEVSP1-BRS -Lead-Free Brass Valve Body and Checkstop Assembly
This hot & cold valve is for use with the Master-Trol Valve Controller. The 24VAC solenoid, soft closing valve features pushbutton activation, is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. Refer to EVS catalog sheets regarding Master-Trol options and technical data.Valve Specification:Minimum Pressure: 30 PSI (206.84 KPA)Maximum Pressure : 100 PSI (689.48 KPA)Maximum Water Temperature 130°F (54°C)EVS2 - Standard ValveEVS2-BRS - Lead-Free Brass Valve Body and Checkstop Assemblies
This hot & cold valve is for use with the Master-Trol Valve Controller. The 24VAC solenoid, soft closing valve feature piezo touch activation and is provided with a stainless steel strainer and integral checkstop. The Piezo buttons have no moving parts and are touch activated. When the Piezo buttons are touched this closes the circuit and activates the controller which activates the valve. Valve conforms with the lead free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. Refer to EVS catalog sheets regarding Master-Trol options and technical data.Valve Specification:Minimum Pressure: 30 PSI (206.84 KPA)Maximum Pressure : 100 PSI (689.48 KPA)Maximum Water Temperature 130°F (54°C)EVSP2 - Standard ValveEVSP2-BRS - Lead-Free Brass Valve Body and Checkstop Assembly
Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Two Single Temperature valves or two sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.
Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Three Single Temperature valves or three sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.
Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Four Single Temperature valves or four sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.
This single temperature valve is for use with the Time-Trol Valve Controller. The 24V solenoid valve features pushbutton activation and is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997 and ADA requirements.
Use of this option eliminates the requirement to provide electrical power and wiring for units with -MVC1 Time-Trol. Each solenoid valve is powered by a concealed 9 volt battery (Not included).
This hot and cold valve is for use with Time-Trol Valve Controllers. The 24V solenoid valve features pushbutton activation and is provided with a stainless steel strainer and integral checkstop. Valve conforms with the lead free requirements of NSF61, Section 9, 1997 and ADA requirements.
Use of this option eliminates the requirement to provide electrical power and wiring for units with -MVC2 Time-Trol. Each solenoid valve is powered by a concealed 9 volt battery (Not included).
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
Designed for conservation, the toilet flush valve supplied operates with 1.6 gallon (6 liter) per flush. Standard supplied flush valve for toilet or comby uses 3.5 Gallon (13.2 Liter) per flush.
This flush valve assembly is intended to be used with Master-Trol Valve Controller and can be used on combys, toilets and urinals. The 24VAC solenoid operated flush valve features pushbutton activation and is ADA compliant. Refer to EVS catalog sheets regarding Master-Trol options and technical data.
This option is for the electronic valve system with a single Piezo pushbutton. The Piezo pushbutton has no moving parts and is touch activation. When the Piezo pushbutton is touched this closes the circuit and activates the controller connected to the flush valve.
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
Provides an Acorn Time-Trol System for limiting frequency of flush valve operation through electronic control of a solenoid flush valve. Pushbutton conforms to ADA requirements using less than 5 lbs. to activate. Refer to individual MVC catalog sheets in Valves section for technical data.
This option is for -MVC Time-Trol valves. This feature enables the user to terminate the metering cycle at any time by simply pushing the pneumatic actuator pushbutton on the fixture.
With this specification, the inlet consists of a slip joint O-ring connection and permits a plus or minus 1/2" horizontal adjustment. The outlet is 4" no-hub.
With this specification, the inlet consists of a slip joint O-ring connection and permits a plus or minus 1/2" horizontal adjustment. The outlet is 3" no-hub.
The lavatory waste is directed into the toilet bowl on a Lav-Toilet Comby by way of a removable tube. Please consult local code requirements prior to specification of this option.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option is to have the trim installed at the Acorn Engineering factory. The trim includes pushbutton(s), Bubbler, Spout, etc. This option saves time on installation in the field.
This unique Acorn anti-flood system prevents toilet water overflow by shutting off the water supply from the flush valve. A reset button in the chase area reactivates the system only after the waste line has been cleared.
This option eliminates the requirement to manually reset the Flood-trol valve assembly by substituting a float tank for the reset button assembly. Flush valve becomes operable automatically after the flood condition has been corrected.
This option is for use on combination fixtures to locate the flush valve pushbutton opposite its standard location. For example, the standard flush valve pushbutton location for -CT, -RO and -AR units is on the right hand side of the backsplash. When specified, the pushbutton will be located on the left hand side (-AL and -LO units are opposite). In most cases, this is intended to prevent interference in the chase area with other devices.
For use where wall thickness exceeds 2", this option allows the slip joint nut to be more accessible, making installation easier. The outlets at each end are NPT male threaded. Flush valve must be specified separately.
This option provides a grab bar with a closure plate for a 1432 combination fixture making it suicidal resistant.
This option provides a grab bar and a lavy closure plate that makes the fixture suicide resistant. Option -SPS (Ligature Resistant Skirl on Toilet) is recommended to meet Ligature Resistant applications.
This option provides a flange which will accommodate a wax or rubber seal ring This is a standard feature on floor outlet and front access (Suffix Option -FA) models but must be specified on other models.
This option provides an attractive high polish mirror finish seat.
When specified, Acorn will provide a white plastic, hinged toilet seat. Although these seats offer obvious sanitary advantages, they are not tamper-resistant.