Should we keep showing the banner you just clicked on?
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
The fixture is mounted off the floor and is plumbed for a wall waste outlet. Wash fountains with this option include a grid strainer and tail piece.
The fixture is mounted on the floor and is plumbed for a wall waste outlet. Wash fountains with this option include a grid strainer and tail piece.
This option includes and individual pushbutton control for the Air-Control™ Metering valve and is provided standard with a hot and cold pressure balancing mixing valve. Water flow metering can be field set for range from 5 to 60 seconds. Pushbutton requires less than 5 pounds of pressure to activate the valve. See individual model specification sheets for pushbutton location.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
Use of this option provides "Hands-Free" washing. It includes an infra-red sensor operated, solenoid water valve, mixing valve and a transformer. A 24VAC sensor is used on our Wash-Ware product lines whenever the -SO option is selected. This sensor operates with a 30 second metered flow or cycle once an object is detected before turning off the solenoid valve.
In addition to saving installation costs, this option is ideal for renovation projects where hands-free control is desired. Use of this option eliminates the requirement to provide electrical power and wiring for units with -SO Sensor Operated Control. Each sensor and solenoid valve is powered by a concealed battery pack with 6 AA batteries (batteries provided by the installer and not included). We recommend using Lithium or Alkaline batteries to power the sensor.The -SO-BAT Sensor activates the solenoid valve whenever an object is detected in the range area. The sensor will keep the solenoid open, allowing water to flow until the object is removed from sensor range. If an object is positioned in a manner that it is under constant detection the sensor will turn the solenoid off after 30-90 seconds.
When a high degree of abuse is anticipated, this heavy gage stainless steel brace is welded to the backsplash and sprayhead column for extra support. The brace has a polished finish and is compatible with Wash-Ware Corner or Semi-Circular fixtures.
This option provides a concealed sprayhead mounted soap tank and is intended for powder style soap. Vertical dispensers are mounted beneath sprayhead. Soap tank may be refilled through removable sprayhead lid. This soap dispenser is ADA compliant.
This option provides sprayhead mounted vertical soap dispensers, centrally located below a six quart soap tank which is located within sprayhead. Dispensers are intended to accommodate common liquid and lotion soap varieties. This soap dispenser is ADA compliant.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
The bibb is mounted on either the left or the right side of the fixture pedestal, conveniently located for janitorial use. Hose bibbs are provided with polished chrome plate finish.
This option is designed to provide additional structural reinforcement for the column and the sprayhead on a washfountain. A pipe brase is inserted iin the column to receive a 1-1/2" galvanized pipe (by others), which runs through the column ending at the sprayhead.
This option provides an individual deck mounted pump dispenser for each basin (Meridian) or every other station (Wash-Ware). Dispenser features anti-rotation pin to maintain discharge nozzle over basin. Option includes a reservoir featuring a separate refill. Not available for Corterra Kurve washbasins model number: 3791, 3792 and 3793.
This option is intended to replace the standard vinyl clad enclosure with a stainless steel enclosure which includes a #4 satin finish.
This option provides a Single Temperature Air-Control™ Metering Valve assembly and is offered as an alternative to the standard hot and cold mixing valve when a single water supply is desired.
Dispensers are conveniently angled for easy accessibility for all users. Circular Models have a triangular arrangement and are provided with an adjustable brace or anchoring screws for stability. Vent Off Drain fixtures are provided with an additional 1-1/2" IPS galvanized pipe extended to the top of the dispensers.
Single-fold paper towel dispensers are also available. They will be located similarly to the Multi-Fold dispensers.
This option specifies a black vinyl clad enclosure. Black vinyl is standard for Stainless Steel Wash-Ware Washfountains and Meridian Wash Basin Models 3711, 3712, 3713, 3714.
This option specifies a gray vinyl clad enclosure. Gray vinyl is standard for Meridian Wash Basin Models 3771, 3772 and 3773.