Should we keep showing the banner you just clicked on?
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
The fixture is mounted off the floor and is plumbed for a wall waste outlet. Wash fountains with this option include a grid strainer and tail piece.
The fixture is mounted on the floor and is plumbed for a wall waste outlet. Wash fountains with this option include a grid strainer and tail piece.
This option provides a 4" centerset, chrome-plated brass gooseneck spout with wrist blade handles and is furnished with mounting collars and nuts. Includes Aerator with 2.2 GPM flow restrictor.
This option includes and individual pushbutton control for the Air-Control™ Metering valve and is provided standard with a hot and cold pressure balancing mixing valve. Water flow metering can be field set for range from 5 to 60 seconds. Pushbutton requires less than 5 pounds of pressure to activate the valve. See individual model specification sheets for pushbutton location.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
Use of this option provides "Hands-Free" washing. It includes an infra-red sensor operated, solenoid water valve, mixing valve and a transformer. A 24VAC sensor is used on our Wash-Ware product lines whenever the -SO option is selected. This sensor operates with a 30 second metered flow or cycle once an object is detected before turning off the solenoid valve.
In addition to saving installation costs, this option is ideal for renovation projects where hands-free control is desired. Use of this option eliminates the requirement to provide electrical power and wiring for units with -SO Sensor Operated Control. Each sensor and solenoid valve is powered by a concealed battery pack with 6 AA batteries (batteries provided by the installer and not included). We recommend using Lithium or Alkaline batteries to power the sensor.The -SO-BAT Sensor activates the solenoid valve whenever an object is detected in the range area. The sensor will keep the solenoid open, allowing water to flow until the object is removed from sensor range. If an object is positioned in a manner that it is under constant detection the sensor will turn the solenoid off after 30-90 seconds.
This option provides a stainless steel tubular spout. "J" Spout is deck mounted and is designed to allow ample space for hands.
This option provides a stainless steel tubular spout. "L" Spout is deck mounted and extends over bowl to utilize entire basin.
This option positions Air-Control™ Metering valve pushbutton on stainless steel countertop and is offered as an alternative to the standard backsplash mounted pushbutton. May not be available with selection of other combinations.
This option provides a removable stainless steel enclosure to completely conceal drain waste fitting, supply and waste connections, and under basin(s). Works in conjunction with standard stainless steel trap enclosure to fully conceal bottom of unit. (Not available with -SSN 2-1/2" High Narrow Skirt.)
This option provides additional countertop space to the LEFT side of the basin. This counter space may be used to offset a basin from an adjacent side wall or as a toiletry shelf. See individual specification sheets for extended lengths. Note:3770-3773 Series are provided with an open end standard.
This option provides additional countertop space to the RIGHT side of the basin. This counter space may be used to offset a basin from an adjacent side wall or as a toiletry shelf. See individual specification sheets for extended lengths. Note:3770-3773 Series are provided with an open end standard.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This option provides an integral bowl in lieu of the standard self-rimming basin on stainless steel curved front washbasins model numbers: 3701, 3702, 3703, and 3704. Mirror finish rim is not applicable with this option.
This option eliminates the stainless steel trap enclosure, which is normally provided standard to conceal valve assembly and P-trap. Typically, specification of this option would be in conjunction with the use of deck mounted faucets.
This option provides an attractive high polish mirror finish to each individual stainless steel basin. It is best suited for models which utilize a drop-in basin design.
This option provides lavatory bowl with an overflow opening with connection to the lavatory waste outlet.
This option provides an individual deck mounted pump dispenser for each basin (Meridian) or every other station (Wash-Ware). Dispenser features anti-rotation pin to maintain discharge nozzle over basin. Option includes a reservoir featuring a separate refill. Not available for Corterra Kurve washbasins model number: 3791, 3792 and 3793.
This option provides an individual D shape basin, and is less the standard valve. It is intended to provide space on countertop to allow for use of a deck mounted faucet. This option must be used in conjunction with the -09 Less Spout and Valves option and requires the specification of the required VALVE PUNCHING. For 3700 series models, this option is a drop-in basin. For 3700IB and 3710 series models, this option is an integral basin. For 3770 series models, this option is a molded-in basin
This option provides a single 1-5/16" Diameter punching for spout and valve by others.
This option provides two 1-5/16" Diameter punching with 4" centers for spout and valve by others.
This option provides three 1-5/16" diameter punchings with 4" centers for spout and valve by others.
This option provides a sloping, scalloped trap enclosure with an enclosed bottom for curved front Corterra solid surface and stainless steel Washbasins. This option is NOT available for Meridian 3710 series, straight front, stainless steel models. Enclosure conceals valve, waste piping and bottom of unit. Enclosure panels and frame are fabricated from heavy gage, type 304 stainless steel. Roughs may differ from base model, refer to model specific installation sheets.
This option provides a 2-1/2" high narrow front apron for Stainless Steel Washbasins. It is intended as an alternative to the standard 5" high apron and is best used when a specific look is desired. This option is NOT available in conjunction with options -SES Scalloped Enclosure Style, -SLE Sloped Front Enclosure, or -EB Enclosed Bottom. AVAILABLE only on -1 Off -Floor Models.
This option provides a Single Temperature Air-Control™ Metering Valve assembly and is offered as an alternative to the standard hot and cold mixing valve when a single water supply is desired.