Should we keep showing the banner you just clicked on?
Learn More about this warning
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option provides the fixture with a top supply. This typically will feature a threaded top spud on the fixture to mount a exposed top supply flush valve.
This option is intended for the supply line to pass thruogh the wall. This typically will feature a rear spud on the fixture to mount a concealed top supply flush valve.
Toilet design that works utilizing 1.28 gallons (4.85 liters) per flush, thereby reducing water consumption.
Designed for conservation, the toilet flush valve supplied operates with 1.6 gallon (6 liter) per flush. Standard supplied flush valve for toilet or comby uses 3.5 Gallon (13.2 Liter) per flush.
Learn more about electric water management
Acorn will provide a code approved toilet flush valve operating with 3.5 gallons (13.25 liters) per flush, unless specified. When the flush valve is for a Wall Supply toilet (with a rear spud), Acorn will typically provide a concealed flush valve with a vacuum breaker and push button. If Top Supply toilet (with a top spud) is specified, an exposed flush valve with a lever is provided. All exposed parts are chrome-plated
Toilet/Urinal flush valves can be opted out as it would be supplied by others and not by Acorn.
This option is for the flush valve to be activated by a hydraulic pushbutton. This option is ADA compliant to be activated by 5 pounds of force or less. This is only available as a concealed flush valve (typically for toilet with a rear or wall supply configuration).
With concealed flush valves, when specified, Acorn will provide a code approved valve with vacuum breaker and wall mounted lever handle.
This option securely anchors the replacement fixture to the wall on both flushing inlet fittings and lavy waste outlet fittings. It features a threaded anchoring pipe for applicable wall thickness, a thrust plate, and anchoring collar with locking adjustment screws.
The fixture is mounted on the floor and is plumbed for a floor waste outlet by others. This option provides an ADA compliant 18" integral toilet seat height. When used with the optional -HS Hinged Seat, the overall seat height remains ADA compliant at 19". It should be noted that fixture rough-ins will differ from standard with this option.
Chrome-plated brass cap nuts with self locking washers are provided allowing the fixture to be secured from the rear. This option is designed for use where rear access is available.
Bedpan lugs are integral to the closet fixture and helps with the positioning the bedpan during cleaning. The lugs are available for both vitreous china and stainless steel .
This option is for -MVC Time-Trol valves. This feature enables the user to terminate the metering cycle at any time by simply pushing the pneumatic actuator pushbutton on the fixture.
This option provides tamper-resistant cap nuts. The cap nuts are recommended for attachment of the wall flange of Acorn Dura-Ware toilets to the fixture supporting studs.
Selection of this option provides a durable, chip resistant color coat finish to the exterior of the fixture. See the Color Selection Sheet for standard colors; custom colors may be specified
This unique Acorn anti-flood system prevents toilet water overflow by shutting off the water supply from the flush valve. A reset button in the chase area reactivates the system only after the waste line has been cleared.
This option eliminates the requirement to manually reset the Flood-trol valve assembly by substituting a float tank for the reset button assembly. Flush valve becomes operable automatically after the flood condition has been corrected.
For use where wall thickness exceeds 2", this option allows the slip joint nut to be more accessible, making installation easier. The outlets at each end are NPT male threaded. Flush valve must be specified separately.
This option provides an attractive high polish mirror finish seat.
When specified, Acorn will provide a white plastic, hinged toilet seat. Although these seats offer obvious sanitary advantages, they are not tamper-resistant.
This option provides two punch holes for installations of toilet seats and seat covers.
This option provides an extended stainless steel toilet bowl housing skirt. This inhibits the use of bowl as a ligature or suicide device. Skirt extends to front of toilet bowl. This option is only available on On-Floor Toilets with Wall Waste (-2) or Floor Waste (-3).
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This option intended to inhibit hardware, such as screws, washers, nuts & bolts, debris or other foreign material from being deposited inside the fixture bowl during construction leading up to startup in order to preventing damage to fixture finish. Toilet shipping cover is fabricated of 18 gage galvanized steel.