Should we keep showing the banner you just clicked on?
Learn More about this warning
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
An anti-squirt bubbler with mouthguard for directing water into the lavatory. This option should be specified where mouthguards are required by local codes.
This option provides an anti-squirt bubbler without a mouthguard.
Use of this option provides a vandal and suicide resistant drinking bubbler which is designed to prevent use as a suicide device. Additionally, the bubbler design inhibits its use as a device to dislocate and remove handcuffs in a correctional facility. Recommended use is with optional -PBH Hemispherical Pushbutton.
This single temperature valve can be remotely located and is ideally suited for small chase areas. Air-Control™ features 0.5 GPM flow control intended for most lavy applications, indexed push button, stainless steel strainer and integral checkstop. Valve conforms with the lead-free requirements of NSF61, Section 9, 1997 and ADA requirements. Valve is non-metering unless specified with -M option
Learn more about electric water management
Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Two Single Temperature valves or two sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.
Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Three Single Temperature valves or three sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.
Valve assemblies can be manifolded to serve up to four fixtures from a single supply inlet. The valve assembly can be remotely located up to 10 feet away from the actuation pushbuttons. Four Single Temperature valves or four sets of Hot & Cold valves are manifolded. Option is available on Acorn Air-Control™ Valves or valves utilizing Master-Trol or Time-Trol.
9VDC Programmable Piezo button(s) with 10’ foot connection leads are operated by touching piezo cap to activate solenoid valve. Button(s) have a default 8 second metered flow, but can be programed for additional time on site. Flow cycle can be stopped by touching the Piezo cap before the flow cycle ends. Button(s) are powered by 9VDC transformer or optional 6 AA battery pack (Batteries Not Included).
Option -BRS Brass Valve Body & checkstop assembly are pneumatically operated, pushbutton valves that use atmospheric air. The pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve can be remotely located up to 10 feet from the actuating button and is ideally suited for small chase areas. Air-Control valves are provided with a stainless steel strainer, a brass integral checkstop and conforms with the lead-free requirements of NSF61, Section 9, 1997; Federal Public Law 111-380 and ADA requirements. The -BRS Brass Valve Body option is also available with the 24V solenoid operated valves.
Click Enviro-Glaze's® colors below to view in detail!
Why use Enviro-Glaze®?
Acorn Engineering Company has developed a color coating system which will allow you to purchase durable stainless steel fixtures in designer colors. Enviro-Glaze® is a superior finish which gives you a colorful and functional alternative to a stainless steel finish.
What is Enviro-Glaze®?
Enviro-Glaze® is a smooth or textured hard coating that endures impact, will not bubble, and is chip-resistant. The coating is an electrostatically sprayed powder that is applied to the outsideof the stainless steel fixture, then cured at a temperature in excess of 400°F. Vigorous inspectionduring every step of the production process ensures that the finish on every fixture meets Acorn’s high quality standards.
How should Enviro-Glaze® be cleaned and maintained?
Acorn’s Enviro-Glaze® finish creates a beautiful surface that is easily cleaned, maintained andkept in a sanitary condition. A solution of warm water and mild soap is all that is necessary forcleaning the unit.*
* Long exposure to ultra-violet rays of the sun may cause chalking; however, should this occur, use of a mild furniture wax will remove residue and restore the original luster.
This option is to have the trim installed at the Acorn Engineering factory. The trim includes pushbutton(s), Bubbler, Spout, etc. This option saves time on installation in the field.
This option provides a full size, 16 gage galvanized steel template to aid in the rough-in of fixtures. Only one template required per job.
Use of this option provides a vandal resistant valve pushbutton. The conical shape is designed to prevent use as suicide device. When specified on lavatories or combys, the Hemispherical Penal Bubbler (-BPH) is also recommended.
This galvanized steel sleeve provides an opening in the wall for fixture mounting and becomes an integral part of the wall. The sleeve is typical useful in a rear mount/chase application.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This option provides unit housing with 12 gage (0.109") thick stainless steel in lieu of standard. This option is available only for Security Fixtures