Should we keep showing the banner you just clicked on?
Learn More about this warning
When Option CSH-WSB is specified, the showerhead is designed to meet the needs for ligature-resistance and water conservation.
DISCLAIMERS: This product with the CSH-WSA option only is designed to decrease the probability that it may be utilized as an apparatus for ligature. It is not a replacement for professionals who are trained in the proper evaluation, management and supervision of persons at risk of suicide. Other Ligature-Resistant components are necessary including but not limited to shower valves.The showerhead as provided has been certified to meet EPA WaterSense Criteria. The nozzle is removeable for cleaning purposes only.
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
When the wall surface is not adequate to support flange loadings for square-flanged shower heads, Acorn recommends using an Anchor Plate. It consists of a rust-resistant steel plate tapped to receive the flange mounting screws. Additional screws are provided to secure the Anchor Plate to the finished wall.
This option is used with square flanged shower heads. When this option is selected it provides backing for anchoring with front mount plate, all thread studs, nuts and washers provided. May only be used when installed on walls with an accessible pipe chase.
Bent Arm Shower Heads work well over bathtubs and are primarily specified for homes, apartments, hotels, and dormitories. These heads are not recommended for use in applications where vandalism is anticipated.
Use of this option provides a vandal and suicide resistant shower head with a conical shape. Spray pattern is a non-adjustable multi-stream style. Shape of head prevents use as a suicide device. Recommended for use with optional -PBH Hemispherical Pushbutton.
This option provides an ADA compliant fixed shower head with a 48" discharge height to accommodate installations where vandalism of standard handshower is a concern. For Shower-Ware products, image shown with the addition of Penal Shower head nozzle (-P) option.
This option is to have phenolic as the seat surface in lieu of a padded surface. Phenolic material is 1/2" thick, and white in color. Frame is made of stainless steel type 304 with a satin finish.
This option is to have stainless steel as the seat surface. Stainless steel 16 gage, and has a satin finish. Frame is made of heavy gage stainless steel and has a satin finish.
Provides for two mounting locations, one high and one low, for the handshower. The mounting clips are provided at approximately 48" and 60" above finished floor.
This option is intended for shower units when the folding seat is not required or to be furnished by others. Note: May affect ADA compliance.
This option is intended for shower units when the grab bar is not required or to be furnished by others. Note: May affect ADA compliance.
This option eliminates a recessed soap dish where it is provided as standard feature.
The Multi-Stream, Ball Joint Shower Nozzle is available on all Acorn Shower- Ware® systems. The spray pattern is created through a multiple orifice design and is bather adjustable to create a narrow stream or wide pattern. It is ideal in areas that are not prone to vandalism, such as hotels and athletic clubs where the user may desire a more luxuriant shower. Unit may be configured for standard Shower-Ware shower head or for Bent Arm applications -not shown; must specify.
In applications where vandalism is a primary concern, this shower head prevents the user from altering the spray or removing nozzle. Spray adjustment is made through the nozzle with a hex key. Specification of Penal Head prevents selection of additional shower head options.
This option provides a male and female stainless steel quick disconnect coupler assembly to allow for easy removal of the hand shower.
This option provides a reinforced stainless steel privacy panel, post, 36" headrail and vinyl curtain. Installation of this equipment allows for mounting of folding seat opposite the shower control as required by ADA. Shower must be positioned in a corner to utilize components. Panel is reinforced to accept folding seat.
This option provides a 24" slide bar for use with -Fx Hand Shower. Slide bar is shipped loose for wall mounting.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.
This suffix option permits movement of the shower head in all directions, allowing the bather to adjust the spray pattern as needed.
This modification of the standard shower head has a set screw to lock the head into desired positions. This serves to prevent water discharge into drying areas, aisles, and doorways, which is especially beneficial in group shower applications.
Use of this option allows for a higher flow rate of 2.0 Gallons (7.58 Liters) per Minute versus the standard 1.6 Gallon (6 Liters) per Minute. This flow rate of 2.0 gallons will no longer be available for use in the state of California after July 2018.