Should we keep showing the banner you just clicked on?
Learn More about this warning
Top or Wall Supply must be specified
The following item(s) have been added to your cart...You can now continue shopping or go
straight to checkout
This option is for the supplies to be connected above the shower on the shower of the wall. This option is often combined with -SC (supply cover) to conceal the plumbing.
This option specifies that the supplies are coming from within the wall, and into the back of the shower. With this option roughing-in at correct location is important.
Specifying this option provides an integral soap tank, factory pre-piped, and installed within the shower system. The liquid soap is piped to dispensers. Acme Showers are furnished with one 6 qt. tank per 6 to 8 stations, and Meter-Trol dispensers at each station. Apex Showers, when specified for 2 or 3 stations, have a 2 qt. tank, and a single station model is furnished with a 1 qt. tank. Meter-Trol dispensers are supplied for each soap station. Classic and Capital Showers are provided with an approximate 1 gal. capacity tank. The exact size is affected by shower supply configuration.
This option provides a 36" long stainless steel curtain rail with a white Herculite® curtain. Curtain rail includes hooks and mounting clips to wall and is intended for installation within an alcove.
Use of this option provides a vandal and suicide resistant shower head with a conical shape. Spray pattern is a non-adjustable multi-stream style. Shape of head prevents use as a suicide device. Recommended for use with optional -PBH Hemispherical Pushbutton.
Click Enviro-Glaze's® colors below to view in detail!
Why use Enviro-Glaze®?
Acorn Engineering Company has developed a color coating system which will allow you to purchase durable stainless steel fixtures in designer colors. Enviro-Glaze® is a superior finish which gives you a colorful and functional alternative to a stainless steel finish.
What is Enviro-Glaze®?
Enviro-Glaze® is a smooth or textured hard coating that endures impact, will not bubble, and is chip-resistant. The coating is an electrostatically sprayed powder that is applied to the outsideof the stainless steel fixture, then cured at a temperature in excess of 400°F. Vigorous inspectionduring every step of the production process ensures that the finish on every fixture meets Acorn’s high quality standards.
How should Enviro-Glaze® be cleaned and maintained?
Acorn’s Enviro-Glaze® finish creates a beautiful surface that is easily cleaned, maintained andkept in a sanitary condition. A solution of warm water and mild soap is all that is necessary forcleaning the unit.*
* Long exposure to ultra-violet rays of the sun may cause chalking; however, should this occur, use of a mild furniture wax will remove residue and restore the original luster.
This is the standard flow rate for Acorn Showers
Use of this option allows for a higher flow rate of 2.0 Gallons (7.58 Liters) per Minute versus the standard 1.6 Gallon (6 Liters) per Minute. This flow rate of 2.0 gallons will no longer be available for use in the state of California after July 2018.
This option will make the housing of the fixture constructed of fourteen gage material. Fourteen gage material is .078" thick. This option is typically for heavy duty fixtures which range from 16 to 18 gage.
This option provides an ADA compliant fixed shower head with a 48" discharge height to accommodate installations where vandalism of standard handshower is a concern. For Shower-Ware products, image shown with the addition of Penal Shower head nozzle (-P) option.
This option provides a reinforced stainless steel privacy panel, post, 36" headrail and vinyl curtain. Installation of this equipment allows for mounting of folding seat opposite the shower control as required by ADA. Shower must be positioned in a corner to utilize components. Panel is reinforced to accept folding seat.
Primarily specified for showers, this rugged stainless steel soap dish is recessed within the housing of the fixture. The bottom surface is lined with air-circulating dimples to keep bar soap dry.
This option provides a 24" slide bar for use with -Fx Hand Shower. Slide bar is shipped loose for wall mounting.
This option is for surface mounted shower fixtures with a top or bottom supply that runs horizontal on the wall. This option is to cover exposed horizontal piping to the shower. Cover made of 16 gage stainless steel polished to a satin finish. Option is provided with mounting clips and hardware.
This option is for the electronic valve system, namely Master-Trol and Time-Trol. The system is 24 VAC and this transformer is hardwired. Transformer is mounted to plate that fits junction box to cover connections.