Secur-Care® Ligature-Resistant, Front Access Security Wall Shower - CBC (Calif Title 24) and ADA Compliant

Shower is designed to be installed on a finished wall and serviced through a removable front panel. A mounting frame is provided. The unit conforms with ANSI, UFAS, CBC, and ADA requirements for accessibility. [CBC 11B-608.5.1, 11B-608.5.2, 11B-608.5.3] Compliance is subject to the interpretation and requirements of the Local Code Authority.

Upper and lower Conical Showerheads with swivel adjustment provide a user-adjustable universal swivel angle with both vertical and horizontal adjustment.

Shower Panel is 14-gauge, type 304 stainless steel with #4 satin finish. Controls are 38" (965 mm) to 48" (1219 mm) from the finished floor and should be located on the wall in accordance with Shower Stall Type and configuration [CBC 11B-608.5.1, 11B-608.5.2, 11B-608.5.3]. A stainless steel Recessed Soap Dish is included and located at 40” (1016 mm) maximum from the finished floor for CBC requirements [CBC 11B-608.10].

Valve Controls are an accessible design with Metering Pushbutton(s) [CBC 11B-309.4]:

• -03-M and -04-M Air-Control Valve is a metering, non-hold-open type and is adjustable from 5 to 60 seconds. Pushbuttons are Ligature-Resistant, Hemispherical design and require less than 5 pounds of force to activate. Air-control Valve includes a 1.6 GPM flow restrictor. Valves conform with Lead-Free requirements of NSF61, Section 9. [CBC 11B-309.4] and are offered for Single Temperature or H&C supply. (Single temp or hot side water temperature must be tempered as required by code to avoid thermal shock to user.)
• Electronic Metering Valve Pushbutton designs are offered for Single Temperature or H&C supply* with an array of timing and programming options. Refer to individual Electronic Valve submittal sheets for specific technical data.

Diverter Valve is provided standard to deliver water to both upper and lower Showerheads for independent operation as required by the code standard [CBC 11B-608.6]. Includes patented ADA-compliant Tri-Lever Handle.

In-Wall Mounting Frame is constructed of heavy-gauge galvanized steel and provides access to service fixture and Panel mounting using Stainless Steel Vandal-Resistant Fasteners (provided).

Regularly furnished items include Metering Pushbutton Control Valve actuated by Hemispherical Pushbutton, Diverter Valve with Tri-Lever Handle, upper and lower -CSHS Adjustable Conical Showerheads [CBC 11B-608.6; Exception], Recessed Soap Dish [CBC 11B-608.10], and necessary Fasteners (Mounting hardware by others).

Optional Less Diverter Valve (-LDV) provides separate valve control for Showerhead(s) and Handheld Shower. Note: Independent control of Showerheads is required [CBC 11B-608.6, Exception]. Eliminating Diverter is subject to non-compliance. Acorn Engineering Co. assumes no responsibility.

Grab Bars and Folding Seat are ordered separately or provided by others to suit Shower Stall type. Refer to accessibility standards and guidelines for complete installation requirements.